Choose liquid ATMP for established liquid dosing systems, or solid ATMP when a water-soluble powder suits winter use and freezing districts. Match the form to your treatment objective and process conditions.
50.0% min
Active content
1.0% max
Chloride (as Cl-)
2.0 max
pH (1% water solution)
20.0 mg/L max
Fe
Amino trimethylene phosphonic acid ATMP is supplied as a clear aqueous solution or a white crystal powder. We recommend choosing the form first, then matching it to the treatment objective.
Liquid ATMP is a clear, colorless to pale yellow aqueous solution with a minimum active content of 50.0%. It suits dosing systems already set up for liquid water-treatment chemicals. We supply it in 200L plastic drums or 1000L IBC containers, with customer requirements also supported for packaging.
Solid ATMP is a white crystal powder with a minimum active content of 95.0%. It dissolves in water and suits winter use and freezing districts, where a powder format fits storage and transport conditions. We supply the solid form in 25kg bags or according to customer requirements.
For industrial circulating cooling water, ATMP helps prevent scale formation, especially calcium carbonate, through chelation, threshold inhibition, and lattice distortion. We supply it for circulating cool water systems, including applications connected with thermal power plants and oil refineries.
ATMP also fits oilfield water pipelines where scale and metal corrosion need to be controlled. In woven and dyeing industries, it can be used as a chelating agent. The solid form suits metal surface treatment when the process calls for a water-soluble crystal powder.
ATMP can be used with organophosphoric acid, polycarboxylic acid, and salts to build an all-organic alkaline water-treatment agent. Choose this route when your formulation uses a combined treatment program.
| Parameter | Liquid | Solid |
|---|---|---|
| Appearance | Clear, colorless to pale yellow aqueous solution | White crystal powder |
| Active content | 50.0% min | 95.0% min |
| Chloride (as Cl-) | 1.0% max | 1.0% max |
| pH (1% water solution) | 2.0 max | 2.0 max |
| Fe | 20.0 mg/L max | 20.0 mg/L max |
| Density (20℃) | 1.30 g/cm3 min | - |
The density requirement applies to the liquid form. The solid form is identified by its crystal-powder appearance and higher active-content specification. Compare the values with your formulation, dosing equipment, and incoming-material controls before ordering.
What to weigh
Your shortlist
The recommended dosage for many circulating cooling-water systems is 1-20mg/L. For corrosion inhibition, the preferred dosage is 20-60mg/L. Set the feed rate according to whether the treatment objective is scale inhibition or corrosion inhibition.
ATMP is acidic. Avoid contact with the eyes, skin, and clothes. If it splashes on the body, rinse immediately with plenty of water. Store the product for ten months in a shady, dry place.
For the Amino Trimethylene Phosphonic Acid ATMP product, send us your required form, application, packaging, and target parameters so we can match the order to your process.
The company
Hebei Longke Water Treatment Co., Ltd. No. 3, North of Haohua East Road, North Park, Neiqiu county Industrial Zone, Xingtai City, Hebei Province, adjacent to Beijing-Zhuhai Expressway and Beijing-Guangzhou Railway in the west, with convenient transportation and superior geographical location.…
About Us ↗Visit company website ↗